Westinghouse WSF6606, Руководство пользователя, Страница: 13 / 52

13
LOADING YOUR DISHWASHER
LOADING
LOADING YOUR DISHWASHER
Correctly loaded dishes will result in the best energy
consumption, washing and drying performance . There
are two separate baskets for you to load your dishes
into your machine . You can load into the lower basket
round and deep items as pots with long handles, pot lids,
plates, salad plates, and cutlery sets .
The upper basket has been designed for tea plates,
dessert plates, salad bowls, cups and glasses . When
placing long-stem glasses and goblets, lean them
against the basket edge, rack or glass support wire and
not against other items . Do not lean long glasses against
one another if they are unsupported, they may break . It
is more appropriate to locate the thin narrow parts into
the middle sections of baskets . You can place spoons
among the other cutlery sets in order to prevent them
from sticking to one another . You are recommended to
use the cutlery grid in order to obtain the best result .
To avoid any possible injuries, always place such long-
handle and sharp-pointed items such as serving forks,
bread knives etc . with their sharp points facing down or
horizontally on the baskets .
TIPS & INFORMATION
TIPS AND INFORMATION
Ensure the position of the dishware does not prevent the
upper or lower spray arm from turning .
Top basket Cup Rack
These racks are designed to increase the capacity of the
top basket . You can place your glasses and cups on the
racks . You can adjust the height of these racks . Thanks
to this feature, you can place different sizes of glasses
under these racks . The cup racks can be adjusted to 3
height positions . In addition, you can place long forks,
knives and spoons horizontally, so
that they do not block the rotation of the spray arm .
Top basket height adjustment while it is full
Basket height adjustment mechanism on the top basket
of your machine is designed to let you adjust the height
of your top basket (ref to diagram
1
) upwards or (refer
to diagram 2 ) downwards, without removing it from
your machine when it is full, to create more space at the
top or bottom area of your machine as needed . Basket
of your machine is set to upper position in factory
settings .
In order to raise your basket, hold it from both sides and
pull it upwards . In order to lower it, hold it from both
sides again, pull upwards then lower carefully .
Make sure that both sides are in the same position
(up or down) .
1
2