Westinghouse WRC604WC, Инструкция по установке и эксплуатации, Страница: 4 / 16

IMPORTANT SAFETY INSTRUCTIONS(CONTINUED)
Electrical connection
Check that the mains voltage matches with the voltage
on the data plate inside the canopy rangehood.
Check that the installation complies with standards of local
building, gas and electrical authorities. Before connecting
to the mains supply ensure that the mains voltage
corresponds to the voltage on the rating plate inside the
cooker hood.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or similarly qualified
person in order to avoid a hazard.
Safety warnings - for the installer
When installing the cooker hood, make sure you adhere
to the minumum and maximum distances from the cooker
hood base to the hob surface (refer to page 7).
Exhaust flue installation: The following rules must be
strictly followed to obtain optimal air extraction.
Keep exhaust flue short and straight.
Do not reduce the size or restrict exhaust flue.
Keep bends in the exhaust flue to a minimum.
When using flexible flue always install duct with helix
pulled taut to minimise pressure loss.
Failure to observe these basic instructions will
drastically reduce the performance and increase the
nosie levels of the cooker hood.
Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for that purpose. The
exhaust from the cooker hood must not be discharged
into any heating flue, which may carry combustion
products from other sources.
NOTE: Some installations may require the telescopic
exhaust cover to be cut to length. Cut with sharp tin snips
or a fine-tooth hack saw blade, taking care not to distort
or dent the exhaust cover.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
There is a fire risk if cleaning is not carried out in accordance
with the instructions.
The air must not be discharged into a flue that is used for
exhausting fumes from appliances burning gas or other fuels
(not applicable to appliances that only discharge the air
back into the room)
Regulations concerning the discharge of air have to be fulfilled.
CAUTION : Accessible parts may become hot when used with
cooking appliances.