Westinghouse WHT401BR Скачать руководство пользователя страница 10

Page 10

If your heater fails to operate, please follow these instructions:

• Ensure that your circuit breaker or fuse is working properly.

• Make sure the heater is in the upright position.

•  Be sure the heater is plugged in and that the electrical outlet is working 

properly.

•  Check for any obstruction. If you find any obstruction, turn the heater “OFF”. 

Unplug the heater and wait a few minutes for it to cool down. Carefully remove 
the obstruction. Plug the heater in and turn it on again by referring to the 
OPERATING INSTRUCTIONS.

NOTE: 

if you experience a problem with your heater, please see the warranty 

information for instructions. Please do not attempt to open or repair the heater 
yourself. Doing so may void the warranty and could cause damage or personal injury. 
If the problem still persists, please contact us by referring to the service & support 
information on the following page.

CAUTION:

  This heater includes a thermal cut-off that shuts the heater off if it 

overheats  due to abnormal conditions. If this occurs, turn the heater 
“off”, unplug it, and inspect and remove any objects on or adjacent to the 
heater. Allow it to cool for a few minutes, and then plug it back in and 
resume normal operation.

CARE AND CLEANING

It is recommended that the heater be cleaned at least one time during the 
operating season in order to provide the optimum level of performance. 
ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE 
CLEANING. Be sure to save the box for off-season storage.

• Turn the heater “OFF”, unplug it and wait for the heater to cool down.

• Use a dry cloth to clean only external surfaces of the heater.

• Do not use any cleaning agents or detergents.

• Never immerse the heater in water.

• Pack the heater in the original carton and store it in a cool and dry place.

TROUBLESHOOTING

SET UP & USE

INSERTING BATTERIES

1. Press down on the battery compartment cover and slide it out

2.  Insert the batteries, making sure that the positive terminals are facing the proper 

direction marked inside the battery compartment

3. Close the cover by sliding it in.

Notes: Use 2 “AAA” batteries (NOT INCLUDED).

Содержание WHT401BR













Отзывы: