Page 8
SET UP & USE
OPERATION INSTRUCTIONS
1. Plug in the heater into standard household electrical outlet.
2. Adjust the TEMPERATURE control dial clockwise past the “LO” until the power
indicator light illuminates. Continue moving clockwise until you reach your
desired temperature.
3. Adjust FUNCTION control to desired setting. If you want to use the heater with
the oscillation function, use the settings for “
WHT0571 CONTROL PANEL SILKSCREEN
GREY 20
MIN
” – fan only, “LO” heat, “HI” heat
located on the right side of the control. If you want to use the heater without
the oscillation function, use the settings for “
WHT0571 CONTROL PANEL SILKSCREEN
GREY 20
MIN
” – fan only, “LO” heat, “HI” heat
located on the left side of the control.
4. To turn off the heater, adjust the FUNCTION control to “0”position and the
TEMPERATURE control dial to “MIN” position. Then, unplug the unit.
NOTE:
In low heat position, unit is operating at 1000w. In high heat position, unit
is operating at 1500w. Keep that in mind as you try and get the desired
heat output from your unit.
For “Fan Only” function, TEMPERATURE control still needs to be rotated
clockwise past the “LO” position until power indicator light illuminates.
