5
%HIRUH´UVWXVHWKHDSSOLDQFHPXVWEHFOHDQHG:LSHWKHFRQWDFWSODWHVZLWKD
GDPSFORWKWRUHPRYHDQ\UHVLGXHVOHIWIURPWKHPDQXIDFWXULQJSURFHVV
1. Shift in the lockable clasp (located on the handle) in an upward motion towards
the top of unit to unlock the contact plates.
2. Grip the handle and lift the top plate upwards to a 90 degree position.
3. Wipe down the contact plates with a clean damp cloth and lower the top plate.
4. Plug the appliance into an A/C power (240v) outlet and turn on. Verify the
power indicator lights illuminate orange and green to show preheating is in
progress.
5. Once preheat is complete (approximately three to four minutes) the green
pre-heat indicator light will switch off, indicating the product is ready for use.
6. Undo the lockable clasp and lift the upper plate. Place food onto the lower plate
using
wooden or plastic heat-resistant utensils.
7. Lower the top plate to make contact with the food and lock the clasp to begin
cooking.
9.
NOTE:
During the initial use of this appliance, some smoke may be produced.
Please note that this is considered normal operation and once subsided, the smoke
will no longer appear during operation. Please ensure this process is completed in a
well ventilated area.
NOTE:
The cooking time for different foods will depend on the type and thickness
of the foods. Foods should be cooked thoroughly before consumption.
Once cooking is complete, turn the unit off at the power outlet and allow to
cool before cleaning or storage.
8. Once the food is cooked, undo the clasp and use the handle to lift the top plate.
Remove food using wooden or plastic heat-resistant utensils. If additional
cooking is to be performed at this time, please close the plates to conserve
heat.
CAUTION:
Do not use this product to cook or defrost frozen food. All foods
must be completely defrosted before cooking.
CAUTION:
Do not use metal utensils on this product, as they will scratch and
damage the non-stick coating.
:$51,1*
The cooking plates and metal surfaces of the unit will become
extremely hot when in use. To avoid a burn hazard, wear heat resistant mitts or
gloves and touch only the black portion of the Handle.
OPE
5
ATIN
*
INST
5
UCTIONS
© 2021 RVM Australia Pty Ltd. All Rights Reserved