Westinghouse WHDBI-5C Скачать руководство пользователя страница 2

TABLE OF CONTENTS

CONSOLE DESCRIPTION

The 5-channel Wireless Intercom Consoles provide a wireless audio 
communication link between up to five Console stations and one 
or two remote Wireless Doorbell Intercom units.
The intercom uses digital signals to control the stations called and 
provide a unique “house code” that prevents other nearby  intercoms 
from accessing the system. Either of two radio frequencies can 
be selected for the intercoms to further eliminate the chance of 
interference from adjacent systems.
The Console features five station number pushbuttons for selecting 
the party to call. The ALL CALL button can be used to call all 
stations. Pressing the TALK button calls the selected station, then 
controls the direction of the conversation. Each intercom user 
presses their TALK button to activate the microphone during the 
conversation.
The Doorbell works as Console station 4 or 5. Pressing the 
Doorbell’s TALK button sounds a “ding-dong” (station 5), or “dong” 
(station 4) at the Console, then the conversation begins by pressing 
the units’ talk buttons.
For privacy, a MUTE switch on each Console can be set to prevent 
Wireless Doorbell tones and ALL CALL messages from sounding 
through that Console’s speaker.
The Console can be placed on a table or shelf, or mounted to a 
wall with the screws provided. The antenna adjusts for table or 
wall mounting. Power for the Console is provided by a plug-in 
transformer.
The Doorbell attaches to a wall with the mounting plate provided. 
Two 9-volt alkaline batteries power the Doorbell intercom.

214601 C - IMAGE 2

CONSOLE FEATURES...............................................................................................1
DOORBELL FEATURES .............................................................................................2
PREPARE CONSOLE & ANTENNA..............................................................................3
WALL MOUNTING THE DOORBELL...........................................................................4
WALL MOUNTING THE CONSOLE ............................................................................5
OPERATING THE DOORBELL & CONSOLE .................................................................6
OPERATING MULTIPLE CONSOLES ...........................................................................7
CALLING MULTIPLE CONSOLES ...............................................................................8
ADJUSTING THE DOORBELL’S VOLUME....................................................................9
CHANGING A CONSOLE’S SETTINGS......................................................................10
CHANGING A DOORBELL’S SETTINGS ....................................................................11
TROUBLESHOOTING .............................................................................................12
IMPORTANT FCC NOTICE .....................................................................................13

Содержание WHDBI-5C

















Отзывы: