Westinghouse WHD-120, Руководство пользователя

Страница: 5 / 10

5
Mist Output Adjustment
When choosing the mist output level, your choices are Hi (2 lights), Low (1 light),
and Sleep (small moon symbol) Modes. If any of the buttons are pressed
while in the Sleep Mode, the machine will restart in the Hi output Mode.
Negative Ion features (ION)
When using the Negative Ion feature, negative ions will be released with the
mist. Negative ions will add more oxygen to the air within the mist.
Auto Safety Control & Alarm
Under normal conditions, if the water tank is removed, the machine will go into
a “standby mode” to prevent water from splashing. If the tank is off the humidifier
for more than 45 seconds, the control panel will light up and sound an alarm
(only the moon will light up under sleep mode). Once the tank is replaced, the
machine will restart in 5 seconds. If the water tank is not replaced within 5
minutes, the humidifier will turn off the transducer and blower and again will
light up and sound the alarm. This machine will also follow the same procedures
if the water tank is empty or not positioned correctly on the base.
CLEANING YOUR ULTRASONIC HUMIDIFIER
Note: When cleaning the inside of the unit, keep the water away from the air outlet.
■To Keep the Unit Clean:
-Use purified water
-Clean the base of unit, water tank, and ultrasonic transducer every week
-Always use clean water.
-Always drain the water tank when not in use.
-Clean all parts of the humidifier before storing by wiping with a damp cloth,
and buffing with a dry cloth. (Except for the electrical control when the unit
is off, any part of the humidifier may be wiped with a soft damp cloth, and buffed
with a dry cloth ,ensuring the unit is unplugged.)
■Cleaning your humidifier
-Always unplug this humidifier before cleaning.
-This humidifier must be drained and cleaned before storing.
-To clean, use equal parts of distilled white vinegar and water (recommended
amount is 8 ounces of vinegar and 8 ounces of purified water.) Pour this
solution in the water tank and run on high speed for 10 minutes. Rinse out
with clean water and run again for the second time. Replace with fresh water
and the humidifier is ready for use.
■To Clean the Ultrasonic Transducer:
- Put 5-10 drops of distilled vinegar on the surface of the transducer and wait for
2 - 5 minutes;
- Gently clean the surface of transducer with a soft brush until residue is removed;
- Rinse the surface of transducer with clean water.
WHD-120(完成).indd 5 2009-5-13 13:15:08