Westinghouse WGen12000 Скачать руководство пользователя страница 11

Страница: 11 / 34

Westinghouse Outdoor Power Equipment | 11

OFF

120/240-Volt, 30-Amp Twist Lock Outlet

(NEMA L14-30R):

Outlet can supply either

120V or 240V up to 30 amps.

120/240-Volt, 50-Amp Outlet (NEMA 14-50R):

Outlet can supply either 120V or 240V up

to 50 amps.

30-Amp Circuit Breaker:

Circuit breaker limits

the current that can be delivered through the 120-

volt duplex outlets to 30amps.

30-Amp Circuit Breaker:

Circuit breaker limits

the current that can be delivered through the

120/240-volt duplex outlets to 30amps.

Ground Terminal:

The ground terminal is used to

ground the generator.

VFT Data Center:

Press and release the mode

button to toggle between Voltage, Frequency,

Total Hour Meter and Run/Maintenance Timer.

Frequency in hertz

Lifetime run hours

Run/Maintenance

Voltage

The Run/Maintenance Timer displays the time

in hours and minutes each time the generator

is ran. The run timer resets to 00:00 when the

generator is shut off. Built into this run timer is a

maintenance reminder. When the new generator

is ran for 25 hours, the meter will display P25.

This is to remind you to change the oil after the

initial 25 hours of run time. When it displays P50,

it is time to clean the air filter. When it displays

P100 it is time change/clean the fuel filter, clean

the air filter, and change the oil.

Push Button Electric Start:

•

Push for 1 second to automatically start the

engine.

•

Push again to stop the engine.

Engine Control Switch/Battery Disconnect:

Switch to “Stop” to stop the engine. When in

“Stop” position it prevents the unit from drawing

power from the battery. Switch to “Run” before

starting engine.

Battery Charging Port:

Charge the battery when

the unit is off with charger provided.

Smart Switch Outlet:

Connects the Westinghouse

ST Switch (sold separately) to the control panel.

USB Duplex:

Two 5V DC USB ports.

Main Circuit Breaker:

The main circuit breaker

controls total output of all outlets to protect the

generator.

120-Volt, 20-Amp Duplex Outlets

(NEMA 5-20R):

Each outlet is capable of carrying

a maximum of 20 amps on a single receptacle or a

combination of both receptacles.

20-Amp Circuit Breakers:

Each circuit breaker

limits the current that can be delivered through the

120-volt duplex outlets to 20amps.

120-Volt, 30-Amp Twist Lock Outlet

(NEMA L5-30R):

Outlet can supply

120V up to 30 amps.

CONTROL PANEL FEATURES

FEATURES

Содержание WGen12000



































Результаты поиска

Содержание WGen12000

Отзывы:

Бренды по названию

Популярные бренды

Westinghouse WGen12000, Руководство пользователя

Результаты поиска

Содержание WGen12000

Отзывы:

Бренды по названию

Популярные бренды