P a g e
|
4
8. Operation
Position the Westinghouse® massager in a stable place and connect it to an AC wall outlet.
Press the “on”
switch. The power light will go on and the massage session will start at the speed/intensity level 1. You can
then choose an automatic massage mode or adjust the foot massager manually.
For the automatic mode
Press the SELECT button repeatedly to choose one of the 4 preset automatic massage modes (Vitality,
Relaxation, Reflexology and Active). An indicator light will light up to confirm the selected mode.
While using any of the automatic massage modes, you may check the number of minutes left by
pressing the TIMER button on the unit or on the remote control.
The programmed massage length, speed and heat setting should vary according to your health. We
recommend starting using the Westinghouse® massager slowly and progressively as you get use to the
unit more and more.
- Vitality mode
Press the blue button on the wireless control or the Select button on the unit to activate
this mode. The vibration speed will fluctuate from levels 1 to 15 with infrared heat levels
from 1 to 8.
- Relaxation mode
Press the green button on the wireless control or the Select button on the unit to
activate this mode. The vibration speed will fluctuate from levels 1 to 4 and infrared
heat levels from 1 to 3.
- Reflexology mode
Press the red button on the wireless control or the Select button on the unit to activate
this mode. The vibration speed will fluctuate quickly from levels 1 to 15 and infrared
heat levels from 1 to 8.
- Slimming mode
Press the yellow button on the wireless control or the Select button on the unit until this
mode is activated. The vibration speed will fluctuate quickly from levels 6 to 12 with
infrared heat levels from 4 to 6.
For the manual mode
- Massage speed
Press the
“
+
” key to increase the massage speed, and the “
-
” key to decrease it. You can
choose between 1 and 15 to select the speed level of your choice.
- Infrared heat intensity
Press the INFRARED button repeatedly on the remote or on the base of the unit to select
the infrared heat intensity level from 1 to 8.
- Massage duration time
Press the TIMER button repeatedly to manually select the massage duration time (10, 20
or 30 minutes).
LED Display Window
The LED display window can show the following:
- Vibration speed/intensity level
