
WARNING! Deactivate the appliance before carrying out any check.
In case of major problems, the acoustic signals operate, the display shows an
error code and the Start/Pause button may flash continuously:
Error code
Possible cause
Remedy
E5A
Appliance motor overloaded.
Too much laundry or entrap in the
drum.
The program was not completed.
Remove the laundry from the
drum, set the program and restart
the cycle.
E97
Internal fail. No communication be‐
tween electronic elements of the
appliance.
The program was not finished
properly or the appliance stoped
too early. Switch the appliance off
and on again.
If the error code appears again,
contact the Authorised Service
Centre.
EH0
The mains supply is unstable.
When the appliance is showing
EH0, please wait until main supply
is stable than press start. If the ap‐
pliance pause the cycle without
any indication then press the cycle
start. If the warning will occur
check the power cord / socket in‐
tegrity or main supply.
If the display shows other error codes, deactivate and activate the appliance. If the
problem continues, contact the Authorised Service Centre.
In case of different problem with the tumble dryer check the table below for possible
solutions.
Troubleshooting
Problem
Possible solution
You cannot activate the appliance.
Make sure that the mains plug is connected
to the mains socket.
Check fuse in fuse box (domestic installa‐
tion).
The drum does not rotate.
Release the rear drum locks manually (see
chapter
Before First Use).
The program does not start.
Press Start/Pause.
Make sure that the appliance door is closed.
20
westinghouse
Содержание WDH804N7WA
