WARNING:
1. This product is not a toy and contains small parts. Close supervision is necessary when
this unit is used near children.
2. To reduce the risk of electrical shock, do not put the unit in water or other liquid. For
cleaning, use a soft dry cloth. Do not place or store appliance where it can fall or be pulled
into a tub or sink.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B Digital
Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmfull interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received,including interference that may
cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
MULTI-COLOR LED INDICATOR LIGHT INSTRUCTIONS:
1)
RED LIGHT
indicates solar LED pool light is charging. USB plug or solar charging,
red light will remain on until solar LED pool light is fully charged and turn off.
2)
BLUE LIGHT
indicates bluetooth status. Turn on the bluetooth speaker and enter
into the bluetooth search mode, the blue light flashes. After the smart phone/tablet is
connected with the speaker, the blue light will stop flashing. When music is playing, the
blue light flashes.
3)
PURPLE LIGHT
indicates solar LED pool light is charging and connected to a smart
phone/tablet.
PARTS AND SPECIFICATIONS
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
WATERPROOF
8.5"
11"
HOW TO OPERATE POWER BUTTON (F):
1) Press Power button (F) and hold for 2 seconds to turn light ON and OFF. Once ON,
bluetooth speaker will enter pairing mode. Activate bluetooth on your smart phone/tablet
and find device named
Westinghouse SR82
. Press to pair.
2) Press Power button (F) and hold for 2 seconds to turn off speaker.
3) Press Power button (F) to pause or play music.
NOTE: LOW BATTERY TIPS.
When the power of the light is low, a beep will sound. Immediately charge with USB plug
provided. If product is not charged in sufficient time, product will shut off. Please keep the
speaker in a dry environment when using USB charging. Do not allow open the USB cover
in the water to charge the light.
HOW TO PAIR TWO POOL LED LIGHTS:
Standard pairing operation
1) Make sure two solar pool lights are turned on and they are not paired with other
Bluetooth devices yet. The distance between two solar pool lights must be within
32 feet (10m).
2) Double click power button (E) of one of the pool light will make two speakers
connected with each other. The one you press the power button will be the parent
light (PL). The other will be child light (CL).
3) After pairing the two solar lights, searching by smart phone/tablet will only display one
bluetooth device named “ Westinghouse SR82”.
4) Press to pair. Once paired, both speakers will play at the same time.
NOTE:
1) Once paired. Double click the power button (F) of one of the pool lights in the pairing
mode will disconnect the two speakers. At this time, the (PL) will continue to be connected
with the smart phone/tablet, and (CL) will disconnect with the (PL).
(CL) will enter bluetooth search status.
2) We highly recommend to use “STANDARD PAIRING OPERATION” when pairing two
lights. Otherwise, the two lights cannot be paired due to improper operation or the smart
phone/tablet can not connect to the speaker. For example, when two speakers are paired
and connected to the smart phone/tablet, double-click on any one of the speakers power
button (F) will cause both speakers to exit the pairing mode. If you double-click the power
button of the (CL) again, you will not be able to re-pair successfully.
3) When the two speakers have been paired with the same smart phone/tablet separately.
The smart phone/tablet will save two “Westinghouse SR82” in the device list. Next time if
you follow the “Standard Pairing Operation” to link two speakers, the smart phone/tablet
will find two “Westinghouse SR82”, If you try to pair with (CL), it will not connect
successfully.
4) The solar LED pool light has an automatic reconnection feature. When the solar LED
pool light is connected to the smart phone/tablet and then restarted, if the previously
connected smart phone/tablet is in the connection range, the solar LED pool light will
automaticlly connect with the previously connected device first. In this case, if you want to
connect with
another device, the device is connected to the solar LED pool light needs to
be disconnected first. Then the solar LED pool light can be connected with another smart
phone/tablet.
HOW TO OPERATE LED BUTTON (D):
1) Short press the LED (D) button, for LED white light.
2) Then short press the LED button to turn OFF the LED white light.
NOTE:
If two lights are paired with each another, then you only need to press the
LED button of one of the lights to control both LED lights.
A) Solar panel
B) Bluetooth Speaker
C) TPU Plastic
D) LED Button
E) LED Charge Indicator
F) Power Button
G) Charging Port
H) Light Lens
I ) Micro USB Cable
EN | 2
EN | 1
A
B
C
D
E
F
G
H
I
CHARGING INSTRUCTIONS
A
G
CHARGING METHOD:
NOTE:
The solar LED pool light meets IPX7
rating when the USB cover is tightly secured.
Please do not place in water when the USB
cover is open. This product is only suitable for
fresh water, tap water, and pool water.
When the solar LED pool light is placed in water, if water enters the bluetooth speaker
(B) you may experience a slight impact on the sound quality. Position pool light upside
down with bluetooth speaker facing the ground to drain out any water. Shake out any
excess water to restore back to original sound quality.
D
E
F
NOTE:
For volume control, use your smart phone/tablet.
IPX7
Waterproof Standard
1) USB charging port (G)
Connect the external 5V power supply to
charge the product.
2) Direct sunlight to solar panel (A) for
8-10 hours for full charge.
