6
ENGLISH
QB025 6
Installation
This product is designed to connect to your existing plumbing . Your
shower valve, diverter valve or diverter tub spout will be used in its
current position and will operate as before, see Fig . 2 .
Existing
shower
valve
Existing
shower
valve
Tub spout
Diverter
Fig .2
- Insert the shower arm (T) into the shower column (S) and
secure it with the nut (R), see Fig . 5 .
S
T
R
Fig .5
-
Place the rubber washer (N) onto the L-fitting (M).
-
Connect the L-fitting (M) to the shower arm (T), see Fig. 6.
T
M
N
Fig .6
- Check that the rubber washer (U) that is pre-assembled in the
shower head (V) is not loose .
- Screw the shower head (V) on to the shower arm (T), see Fig . 7 .
V
T
U
Fig .7
SHOWER HEAD INSTALLATION
- Remove the top cover (P) and the stainless steel cover (Q) from
the shower column (S), see Fig . 3 .
- Remove the nut (R) that is pre-installed in the shower arm (T),
see Fig . 4 .
Q
P
S
Fig .3
T
R
Fig .4