Westinghouse PT20115, Инструкция по эксплуатации, Страница: 4 / 15

3 1 7
4 11
GENERAL POWER TOOL SAFETY WARNINGS
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
LISTA DE PARTES
NO. Descripción Cant.
1 tornillo M5x18 1
2 arandela elastica 5 1
3 porta brocas 13mm 1
4 eje 1
5 llave de ajuste 3X3.7X10 1
6 anillo elastico para hoyo 32 1
7 cubierta del polvo 1
8 anillo de lana 1
9 balinera 6002-2Z 1
10 tornillo ST4.2X40 1
11 caja de engranaje 1
12 anillo elastico paa eje 15 1
13 engranaje 1
14 anillo elastico paa eje 10 1
15 resorte de impacto 1
16 equipo de impacto (estatico) 1
17 alinera 608-2Z 1
18 placa de la marca 1
19 inductor B 1
20 indicador de encendido 120v 1
21 manuabrio izquierdo 1
22 manga del cable 1
23 cordon de corriente 1
24 abrazadera del cordon 1
25 tornillo ST4.2X14 3
26 interruptor (120V 1
27 manubrio derecho 1
28 carcasa 1
29 tornillo ST4.2X16 6
30 etiqueta derecha 1