background image

2

Saynet-EI-Mountain Gale (RC)-WH21

TOOLS REQUIRED

Phillips Screwdriver         Wire Cutters         Pliers        Step Ladder

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, 

OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

READ AND SAVE THESE INSTRUCTIONS

SAFETY TIPS

1.   Proceed with caution. Read all instructions before beginning the installation.

2.   WARNING! This fan may be operated only with a 2-pole switch with a 3mm contact opening each.

3.   Only an authorized electrician should execute the installation.

4.   The installation height, i.e. the distance between the blades and the floor, should be at least 3.05 m.

5.   The supply to the remote-control receiver should be connected through a mains switch.                 

6.   Make sure the fan is securely fastened at the ceiling.

7.   WARNING! Do not use a dimmer type switch to control the fan speed.

8.   WARNING! To prevent injuries, make sure the blades are not bent and that there are no objects with in the area of rotation.

9.   Disconnect from power supply at wall switch before working on remote control receiver or ceiling fan.

10. WARNING: Do Not use this fan in the same room at the same time as a gas or fuel burning fire, unless the flue has been tested under these conditions of use by a competent person.

11. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and 

       knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not 

       play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

12. Suitable for use indoor and outdoor.

13. Install receiver into the ceiling fan canopy of the fan to ensure proper protection. Do not expose receiver to water.

14. Fan includes remote-control, do not pull on or cut lead wires shorter on the receiver, do not drop or bump the receiver and transmitter.  

15. PLEASE NOTE: The battery will weaken with age and should be replaced before leaking takes place as this will damage the transmitter. Dispose of used battery 

      properly, and keep the battery out of reach of children.

16. CAUTION: To reduce the risk of fire or injury, do not use this product in conjunction with any variable (rheostat) wall control.

17. Means for all poles disconnection having a contact separation that provide full disconnection under over voltage category III conditions must be incorporated in the 

      fixed wiring in accordance with national wiring rules.

Содержание Mountain Gale





























Отзывы: