Usage
For the first use, fill the kettle with water up to the maximum water
level, boils water and then pours boiling water out, then clean the
kettle with cool water, repeat this operation for one or two times to
completely eliminate dust caused in production or storage.
1. Put the power base on an even place.
2. Open the lid and fill the kettle with water. Do not overfill! Use the
water level lamp.
Caution: too much water may cause overflowing boiling water. That’s
dangerous!
3. Close the lid and fit the kettle on power base.
4. Insert the plug in 220-24OV
～
power source.
5. Switch the machine to position “1”. The lamp lighting up shows that
the water is being boiled.
6. Ten seconds after boiling, the kettle will automatically shut itself off
(with “0” downwards) and the lamp will go off, you can also press “0”
to shut off power manually.
Attention: after automatic power off, make sure not to press “1” with
force. If required, restart work till 30-60 seconds later.
Caution: never open the lid in operation. That’s dangerous
7. Lift the kettle from the base first for pouring water.
