Westinghouse 18K-24K, Инструкция по использованию и установке, Страница: 14 / 60

a .For Ceiling already Completed with Panels
b . Ceiling not Completed with Panels yet
3.3 Installation Details for Air Panels
●
Installation work for air panel should be done according to the Installation Manual for Air Panel.
●
Ensure that the connector between indoor unit and the air panel is properly connected.
Installation and Maintenance
12
1/4 (7)
Unit: in. (mm)
●
Check the level of the drain pan using a level to avoid incorrect operation of the drain discharge
mechanism in the indoor unit. The drain piping side of the indoor unit must be approximately
3/16 in. (5mm) lower than the other side.
●
Tighten the nuts of the suspension brackets after the adjustment is complete. Apply LOCK-TIGHT
paint* to the bolts and nuts to prevent them from loosening, Otherwise, abnormal noises or sounds
may occur and the indoor unit may fall down.
LOCK-TIGHT paint*: Paint the lock bolts and nuts. Adjust the indoor unit to the correct position while checking
with the scale (factory-supplied).
(1) Installation template is attached with the packing
.
(2) Adjust the position of indoor unit
,
as shown below by using checking scale
.
3
.
2
.
4 Adjusting the Space between Indoor Unit and False Ceiling Opening
Model
9K~12K
3/16 to 3/8
(5 to 10)
3/8 to 1-3/8
(10 to 35)
18K~36K
a
in. (mm)
a
a
a
a
Surface of
Suspended ceiling
CAUTION
Installation template