Westin HDX Bandit Скачать руководство пользователя страница 4

Страница: 4 / 10

Westin Automotive Products, Inc.

320 W. Covina Blvd

San Dimas, Ca. 91773

Thank you for choosing Westin products

for additional installation assistance please call

Customer Service (800) 793-7846

www.westinautomotive.com

P.N.: 75-5831135-RevA

ECO #: W18-0228

DATE: 08/21/2019

7. If reusing the factory fog lights, remove them from the OEM Bumper. If aftermarket lights will be used, install them at this

time and move to

Step 9

Using Items 6-9 and supplied M6 hardware, reinstall the fog lights on to the Bandit bumper.

See Figure 5-6

Note:

Fog light

brackets “A” and “B” belong to the driver side while fog light brackets “C” and “D” belong to the pas-

senger side

9. If equipped, reinstall sensors on to the HDX Bandit bumper.

Note:

A separate parts kit will need to be purchased in order

to install parking sensors. Refer to PN

58-30005

for instructions.

Bracket A

Bracket B

Fig. 5

Driver side shown, passenger side (8,9) similar

Fig. 6

Driver side shown

Содержание HDX Bandit











Результаты поиска

Содержание HDX Bandit

Отзывы:

Бренды по названию

Популярные бренды

Westin HDX Bandit, Руководство по установке

Результаты поиска

Содержание HDX Bandit

Отзывы:

Бренды по названию

Популярные бренды