VEHICLE RECOVERY ELECTRIC WINCH FITTING INSTRUCTIONS
T-MAX
UTV SERIES
Step (8) Check the Winch
a) All connections of cables is correct;
b) No cable or tie-in is uncovered well;
c) All cables should be wrapped by Thermoplastics Pipes;
d) To disengage the clutch, turn on the remote control as “OUT” position. Cable may be free spooled off the drum;
e) To engage the clutch, turn on the remote control as “IN” position. The winch is now ready for pulling.
MAINTENANCE
Periodically check tightness of mounting bolts and electrical connections. Clear any dirt or corrosion that may have
accumulated on the electrical connections.
NOTE:
Repair should be done by Authorize T-MAX Repair Centers ONLY. Do not attempt to disassemble the gear box.
Disassembly will avoid warranty.
The safety precautions and instructions discussed in this manual can’t cover all possible conditions and situations that
may occur. It must be understood by the operator that common sense and caution are factors, which cannot be built into
this product, but must be applied by the operator.
11
