4
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N. 75-5841075-RevA
ECO #: W18-0236
DATE: 02/27/19
8. Loosely install the bumper assembly to the Mounting Brackets (5,6) using the supplied M12 Hardware. See
Figures 6 & 7.
Fig. 10
Fig. 6
Fig. 7
Driver Side Shown
Driver Side Shown
9. Remove the parking sensors from the OEM bumper. Pay attention to the orientation of the sensors. They must be installed
in the same orientation. Handle sensors with care, they are very delicate .
10. Use the Sensor Tab (10) along with the supplied M6 Hardware (15-18) to install the sensors as shown in
Figure 8.
11. Carefully route the harness around the bumper.
Note: Zip ties or double sided tape can e used to route harness and to hold the sensor in position.
PARKING SENSOR INSTALLATION
*If not installing sensors, install Hole Plugs (9) into holes on bumper and proceed.
Factory Sensor
Item 10
Items 15-18
