4
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-5841025-RevA
ECO #: W18-0229
DATE: 04/15/19
Figure 6
7. Remove plastic pieces behind filler panel using 10mm
socket. Once all screws have been removed, carefully pull
plastic pieces and un-clip tabs around grille area.
See Fig-
ures 6-7.
Figure 7
8. Use the supplied M10 Hardware to attach each Side Pod Assembly (1,2) to the Center Section (4). See
Figure 8.
9. Use the supplied M6 Hardware to attach the LED Brackets (17) to the center section. See
Figure 9.
Note: If installing an
LED Light Bar (sold separately), install it at this time.
Fig. 8
Driver Side Shown
Fig. 9
Driver Side Shown
17
4
39
38
37
40
30 28
29
27
