3
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-583110-RevA
ECO #: W18-0083
DATE: 09/11/18
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
2. Remove the license plate and bracket. Release the wiring harness from the clips attached to the back of the bumper. Move
all wiring harnesses away from bumper.
3. Next, remove the plastic bumper pad assembly,
(Figure 1)
.
NOTE
: Release metal clips from back of bumper to remove
bumper pad assembly. It may be easier to access bumper hardware with plastic air dam removed from bottom of bumper.
4. Place blocks or jack stands under the front bumper to support it during mounting bolt removal. Once the bumper has been
safely supported, remove the large hex nut from the back of each bumper bracket,
(Figure 2)
. Next, from the front of the
bumper, remove the (2) factory hex nuts attaching the bumper to each bumper bracket,
(Figure 3)
.
WARNING!
Assis-
tance is required to hold the bumper in place during bolt removal to prevent the bumper from falling. Carefully slide the
bumper off over the tow hooks.
Fig 1
Fig 2
Fig 3
