2
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-40395-RevA
ECO #: W18-0071
DATE: 10/11/18
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
2. Begin by removing the plastic trim fasteners holding the grille in place. Also dethatch the clips of the wings of the grille.
See
Figures 1 & 2.
3. Remove the grille by pulling firmly and carefully at the bottom of the grille.
4. Use the OEM hardware to secure the Upper Strap Bracket (4-5) to the bumper.
Note: Bumper shown off vehicle for view-
ing purposes.
See
Figure 3
5. Trim the factory trim area to fit the Lower Mounting Bracket (2-3). See
Figure 4.
Fig 2
Fig 1
Remove trim
fasteners
Fig 3
Fig 4
Passenger Side Shown
Trim this area.
Pass. Side Shown
Distance between outer sur-
faces of the Upper Straps
should be approx. 41.3”.
