7/18/2011
PG-2
Westing Automotive Products, Inc.
5200 N. Irwindale Ave. Suite 220
Irwindale, Ca. 91706
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service (800) 793-7846
www.westinautomotive.com
P.N.: 75-0013-RevB W11-0004
CARE INSTRUCTIONS
REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES
STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO
POLISH SMALL SCRATCHES.
GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER
zinc), and (4) M12 hex nuts (black zinc) (FIG 8). Attach the grille guard to the upper mounting brackets using (4) M12 hex
head bolts (black zinc), (8) M12 large flat washers (black zinc), (4) M12 lock washers (black zinc), and (4) M12 hex nuts
(black zinc) (FIG 9). Do not fully tighten at this time.
6. Take the air damn that was removed in step 2 and trim it to fit (FIG 10) , then re install the air dam
7. Align and adjust grille guards as needed then fully tighten all hardware at this time. Torque all M12 fasteners to 55 ft lbs
2
3
4
5
