3
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-3078-RevC
ECO #: W17-0999
DATE: 5/10/17
6. Remove factory bumper bolt see
Figure 13.
Install upper mounting bracket using supplied M8 hardware, tighten to 15 ft-
lbs. See
Figure 14.
7. Reinstall grille and headlight covers in the reverse order of the install instructions.
8. With assistance hold the Grille Guard up to the previously installed brackets. Loosely attach the Grille Guard to the brack-
ets using the supplied M12 hardware. See
Figures 15 and 16.
9. Align and adjust the Grille Guard as necessary. Tighten and torque M12 hardware to 50-55 ft-lbs.
Remove bolt located on
top of headlight cover.
Repeat for passenger side.
Driver Side Shown.
Figure 9
Figure 10
Unclip headlight cover.
Repeat for passenger side.
Driver Side Shown.
Remove bolt located
under headlight cover.
Repeat for driver side.
Passenger Side Shown.
Figure 11
Figure 12
Remove all three clips attached
to grille. Repeat for driver side
then remove grille.
Passenger Side Shown.
Remove bumper bolt
that is furthest left un-
der rubber cover. Re-
peat for driver side.
Passenger Side Shown.
Figure 13
Figure 14
Order of hardware for
upper mounting bracket.
Driver Side Shown.
