2
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-2757-RevB
ECO #: W19-0187
DATE: 12/31/19
PROCEDURE
1. Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim.
Fig. 1
1. Remove one of the End Caps (1 or 2) by
removing the three M4 pan head screws (7)
from the back and bottom of the End Cap
and sliding the End Cap off of the
Aluminum Extrusion (3). See
Figure 1
.
Close Out Panel Installation (Optional)
For vehicles with the required space, the close out panel can be installed to fill the area above the running board.
Remove Three Pan Head
Screws and Slide End Cap
Off of Aluminum Extrusion
2. Slide a Close Out Panel (4) into the groove
in the back of the Aluminum Extrusion (3).
See
Figure 2
.
Fig. 2
