1,2
2
STEP BAR, PASSENGER (1) AND DRIVER (2)
3,4
2
FRONT BRACKET, PASSENGER (3) AND DRIVER (4)
5,6
2
REAR BRACKET, PASSENGER (5) AND DRIVER (6)
7
2
“J” BOLT
8
4
PLASTIC WASHER
9
2
3/8-16 BRIDGE WELD NUT
10
2
3/8-16 X 1.25” HEX HEAD BOLT
11
4
3/8” FLAT WASHER
12
4
3/8” LOCK WASHER
13
4
3/8-16 HEX NUT
14
8
3/8-16 X 1.00” BUTTON HEAD CAP BOLT
15
8
3/8” INTERNAL TOOTH LOCK WASHER
QTY
CONTENTS -
- CONTENU
CONTENIDO
TOOLS -
HERRAMIENTA
-OUTILS
9/16” SOCKET
13MM SOCKET
7/32” HEX WRENCH
RATCHET
RATCHET EXTENSION
TORQUE WRENCH
ITEM
AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
(1)
(2)
(3)
(4)
(5)
(6)
PERNOS EN “J”
8
4
ARANDELA DE PLÁSTICO
9
2
1,2
2
ESTRIBOS, ACOMPAÑANTE
Y CONDUCTOR
3,4
2
SOPORTES DELANTERAS, ACOMPAÑANTE
Y CONDUCTOR
5,6
2
SOPORTES
, ACOMPAÑANTE
Y CONDUCTOR
7
2
SUELDE NUEZ 3/8-16
10
2
PERNOS CON CABEZA HEXAGONAL DE 3/8-16 X 1,25”
11
4
ARANDELAS PLANAS DE 3/8”
12
4
ARANDELAS DE PRESIÓN DE 3/8”
13
4
TUERCAS HEXAGONALES DE 3/8-16
14
8
15
8
TRASERAS
PERNO TERMINAL DE 3/8-16 X 1
ARANDELA DE PRESIÓN DE DENTADO INTERIOR DE 3/8”
(1)
CONDUCTEUR (2)
(3)
CONDUCTEUR (4)
(5)
CONDUCTEUR (6)
7
2
BOULON EN J
8
4
RONDELLE DE PLASTIQUE
SOUDER LA NAUX 3/8-16
BOULON A TETE HEXAGONALE DE
PO
RONDELLE PLATE DE 3/8 PO
12
4
RONDELLE A FREIM DE 3/8 PO
13
4
ÉCROUS HEXAGONAUX 3/8-16
14
8
1,2
2
MARCHE-PIEDS, PASSAGER
ET
3,4
2
SUPPORTS AVANT, PASSAGER
ET
5,6
2
, PASSAGER
ET
9
2
10
2
3/8-16 X 1,25
11
4
15
8
SUPPORTS ARRIERE
BOULON A TETE RONDE 3/8-16 X 1,00 PO
RONDELLE A FREIN A DENTS INTERIEURES 3/8 PO
DADO DE 9/16”
DADO DE 13MM
MANERAL
EXTENSIÓN PARA MANERAL
LLAVE DE TORQUE
LLAVE HEXAGONALE DE 7/32”
DOUILLE 9/16 PO
DOUILLE 13MM
CLIQUET
EXTENSIÓN PARA CLIQUET
CLE DE COUPLE
CLE HEXAGONALE 7/32 PO
75-0848 REVISIONB 8/10/12
WO:
APPLICATION: 2007-13 FORD EDGE/LINCOLN MKX EXCL. SPORT AND ECOBOOST MODELS
APLICACIÓN:
, MOD. 2007-13 EXCL. DEPORTE Y MODELOS ECOBOOST
FORD EDGE/LINCOLN MKX
APPLICATION: FORD EDGE/LINCOLN MKX 2007-13 EXCL. MODÈLES ET SPORT ECOBOOST
25-3440
25-3445
STEP 1
.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions completely
before beginning.
STEP 2.
Determine passenger and driver brackets.
STEP 3.
Thread 3/8-16 x 1.25” hex head bolt through bridge weld nut, insert into outer hole, and use a plastic washer to hold
in place. Insert J-bolt into inner hole and use a plastic washer to hold in place. SEE FIGURE 1.
STEP 4.
Attach front passenger side bracket to the previously assembled 3/8” bolt plate and “J” bolt using two 3/8” flat
washers, 3/8” lock washers, and 3/8-16 hex nuts as shown. SEE FIGURE 1.
STEP 5.
Remove the two foremost factory bolts from the rear suspension bracket. Slide bracket into place and secure using
factory bolts. SEE FIGURE 2.
DRIVER SIDE
LADO DEL CONDUCTOR
COTE CONDUCTEUR
PASSENGER SIDE
LADO DEL ACOMPAÑANTE
COTE PASSAGER
1
3
5
4
7
6
2
