1,2
2
STEP BAR, PASSENGER (1) AND DRIVER (2)
3,4
2
FRONT BRACKET, PASSENGER (3) AND DRIVER (4)
5,6
2
REAR BRACKET, PASSENGER (5) AND DRIVER (6)
7
2
MOUNT BRACE
8,9
4
MOUNT PLATE, PASSENGER (8) AND DRIVER (9)
10
10
M10 HEX HEAD BOLT
11
14
M10 FLAT WASHER
12
12
M10 LOCK WASHER
13
4
M10 HEX NUT
14
8
M10 BUTTON HEAD BOLT
15
8
M10 INTERNAL TOOTH LOCK WASHER
16 2 BOLT PLATE
QTY
CONTENTS - CONTENIDO - CONTENU
TOOLS - HERRAMIENTA
-OUTILS
ITEM
AUTOMOTIVE PRODUCTS, INC.
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
MONTAGES DE MARCHE-PIEDS
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
1,2
2
ESTRIBOS, ACOMPAÑANTE
Y CONDUCTOR
3,4
2
SOPORTES DELANTERAS, ACOMPAÑANTE
Y CONDUCTOR
5,6
2
SOPORTES
, ACOMPAÑANTE
Y CONDUCTOR
7
2
PIEZA DE SUJECIÓN DEL SOPORTE
8,9
4
PLACA DE MONTAJE, ACOMPAÑANTE
Y CONDUCTOR
10
10
PERNOS CON CABEZA HEXAGONAL DE M10
11
14
ARANDELAS PLANAS DE M10
12
12
ARANDELAS DE PRESIÓN DE M10
13
4
TUERCAS HEXAGONALES DE M10
14
8
15
8
(1)
(2)
(3)
(4)
(5)
(6)
(8)
(9)
TRASERAS
PERNO TERMINAL DE M10
ARANDELA DE PRESIÓN DE DENTADO INTERIOR DE M10
16 2
PLACAS DE PERNOS
(1)
CONDUCTEUR (2)
(3)
CONDUCTEUR (4)
(5)
CONDUCTEUR (6)
7
2
RENFORTS POUR SUPPORTS
(8)
CONDUCTEUR (9)
BOULON A TETE HEXAGONALE DE
RONDELLE PLATE DE M10
12
12
RONDELLE A FREIM DE M10
13
4
ÉCROUS HEXAGONAUX M10
14
8
1,2
2
MARCHE-PIEDS, PASSAGER
ET
3,4
2
SUPPORTS AVANT, PASSAGER
ET
5,6
2
, PASSAGER
ET
8,9
4
PLAQUE DE MONTAGE, PASSAGER
ET
10
10
M10
11
14
15
8
SUPPORTS ARRIERE
BOULON A TETE RONDE M10
RONDELLE A FREIN A DENTS INTERIEURES M10
16 2
PLAQUES DE BOULON
75-0835 REVISION C 2/28/12
W12-0998:
APPLICATION: 2008 FORD ESCAPE/MAZDA
TRIBUTE/MERCURY MARINER
APLICACIÓN: FORD ESCAPE/MAZDA TRIBUTE
, MOD. 2008
/MERCURY MARINER
APPLICATION: FORD ESCAPE/MAZDA TRIBUTE/MERCURY MARINER 2008
1
2
8
7
9
3
4
5
6
25-3360
25-3365
26-3360
23-3360
23-3365
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions completely before
beginning.
STEP 2.
Determine passenger and driver brackets.
STEP 3.
Locate rear mount holes (one slot and one hole) on underside of the rocker panel below passenger rear door. Insert
mount plate into slot so holes of mount plate line up with mount holes on vehicle. High side of mount plate should face
up.
SEE FIGURE 1.
STEP 4.
Attach rear bracket to vehicle rocker panel using M10 fasteners as shown. Hand tighten.
SEE FIGURE 1.
STEP 5.
Locate front mount holes (one slot and one hole) on bottom
of unibody rail below front door. Insert mount plate into slot
so holes of mount plate line up with mount holes on vehicle. High side of mount plate should face up.
SEE FIGURE 1.
16
9/16” SOCKET
7/32” HEX WRENCH
RATCHET
TORQUE WRENCH
9/16” WRENCH
DADO DE 9/16”
MANERAL
LLAVE DE TORQUE
LLAVE DE TUERCAS DE 9/16”
LLAVE HEXAGONALE DE 7/32”
DOUILLE 9/16 PO
CLIQUET
CLE DE COUPLE
CLE 9/16 PO
CLE HEXAGONALE 7/32 PO
ALLEN KEY (INCLUDED)
LLAVE ALLEN (INCLUIDO)
CLE ALLEN (INCLUS)
