background image

 

 

 

 

 

 

1   

Westin Automotive Products, Inc. 

320 W. Covina Blvd 

San Dimas, Ca. 91773 

Thank you for choosing Westin products 

for additional installation assistance please call 

Customer Service (800) 793-7846 

www.westinautomotive.com 

P.N.: 75-212329-RevD 

ECO #: W16-0082 

DATE: 2/16/17 

INSTALLATION INSTRUCTIONS 

AUTOMOTIVE PRODUCTS, 

PRO TRAXX 4 OVAL TUBE STEP BARS 

APPLICATION:  
 

2007-2017 Jeep Wrangler 4-Door   

PART NUMBER:  

21-23290, 21-23295

 

ITEM 

QUANTITY 

DESCRIPTION 

TOOLS NEEDED 

1,2 

STEP BARS, DRIVER(1) AND PASSENGER(2) 

16MM SOCKET 

FRONT MOUNTING BRACKET 

16MM WRENCH 

FRONT SUPPORT BRACKET 

5MM HEX DRIVER/

ALLEN KEY 

CENTER MOUNTING BRACKET 

CENTER SUPPORT BRACKET 

13MM SOCKET 

REAR MOUNTING BRACKET 

13MM WRENCH 

REAR SUPPORT BRACKET 

POWER DRILL 

18 

M8 HEX CAP SCREW (BLACK ZINC) 

5/16” -3 /8” DRILL BIT 

10 

36 

M8 FLAT WASHER (BLACK ZINC) 

RATCHET 

11 

18 

M8 SPLIT LOCK WASHER (BLACK ZINC)  

TORQUE WRENCH 

12 

18 

M8 HEX NUT (BLACK ZINC) 

 

13 

12 

M10 HEX SOCKET BUTTON HEAD SCREW (BLACK ZINC) 

 

14 

18 

M10 FLAT WASHER (BLACK ZINC) 

 

15 

12 

M10 INTERNAL TOOTHED LOCK WASHER (BLACK ZINC) 

 

16 

M10 HEX CAP SCREW (BLACK ZINC) 

 

17 

M10 SPLIT LOCK WASHER (BLACK ZINC) 

 

18 

M10 NUT PLATE 

 

ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING

 

PROCEDURE 

1.  Remove contents from box, verify if all parts listed are present and free from damage.  

Carefully read and understand all instructions before attempting installation. 

Failure to identify damage before installation could lead to a rejection of any claim. 

ITEM 3 

ITEM 5 

ITEM 7 

ITEM 4 

ITEM 6 

ITEM 8 

Front  

Front  

Center 

Center 

Rear 

Rear 

Содержание 21-23290

Страница 1: ...13MM WRENCH 8 2 REAR SUPPORT BRACKET POWER DRILL 9 18 M8 HEX CAP SCREW BLACK ZINC 5 16 3 8 DRILL BIT 10 36 M8 FLAT WASHER BLACK ZINC RATCHET 11 18 M8 SPLIT LOCK WASHER BLACK ZINC TORQUE WRENCH 12 18 M8 HEX NUT BLACK ZINC 13 12 M10 HEX SOCKET BUTTON HEAD SCREW BLACK ZINC 14 18 M10 FLAT WASHER BLACK ZINC 15 12 M10 INTERNAL TOOTHED LOCK WASHER BLACK ZINC 16 6 M10 HEX CAP SCREW BLACK ZINC 17 6 M10 SPL...

Страница 2: ...icle un derbody using 1 M10 hex cap screw 1 M10 split lock washer and 1 M10 flat washer See Figure 2 4 Attach the driver side front support bracket to the pinch weld of the vehicle using 2 M8 hex cap screws 4 M8 flat washers 2 M8 split lock washers and 2 M8 hex nuts One more holes located on the pinch weld may have to be enlarged using a 5 16 3 8 drill bit See Figure 2 5 Secure the support bracket...

Страница 3: ...ATCHES GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER 7 At this time attach the driver side step bar to the driver side mounting brackets using 6 M10 hex socket but ton head screws 6 M10 internal toothed lock wash ers and 6 M10 flat washers See Figure 4 8 Align all mounting brackets and step bar as desired Tighten all M8 fasteners to 15 18 ft lbs M10 hex cap screws to 30 ft lbs an...

Страница 4: ...FUNCTION AND SAFETY DRILLING Most Westin products do not require drilling for installation If drilling is defined as required use caution when drilling a vehicle FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN PERSONAL INJURY AND OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE EYE PROTECTION ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE INSTALLATION PROCESS TO AVOID PERSONAL INJURY MAXIMUM ...

Отзывы: