2. Mounting with a knuckle
Secure service wire or conduit to the wiring compartment cover with 1/2” connector ( not provided ). Connect
white fixture wire to white supply wire, black fixture wire to black supply wire. Service ground should be attached
to green ground screw provided.
Ground must be properly attached to avoid the risk of electrical shock. Use wire nuts, crimp-on lugs, or other
approved devices to connect all wires, make sure connections are secure and that no loose wire strands are
sticking out of connectors, Secure wiring compartment cover to fixture. With black and white connections inside
the wiring compartment. Use UL and CUL Listed flexible steel waterproof conduit in trade sizes 1/2 and UL and CUL
Listed Water-proof outlet box cove.
3. Function description of CCT&Wattage Tunable:
(1). If the luminaire is designed to be CCT tunable.Please screw the knob cap to select the corresponding CCT, as
shown in Fig. 1, screw the knob cap after using the CCT selectable function.
(2). If the luminaire is designed to be wattage tunable.Please unscrew the knob cap before using the watt selectable
function. According to the watt selectable label shown in Fig. 2,please toggle the DIP switch 1,2,3 to select the
corresponding watt. Screw the knob cap after using the watt selectable function.
After installation, please
check whether the lighting fixture is firmly fixed.
check whether wires are connected correctly.
At last, turn on the power, and check if the lighting fixture works well. If not, please turn off the
power and contact with local dealer.
CCT tunable Selector
(3000/ 4000/ 5000/ 5700K)
Fig. 1
OR
Wattage Adjustable
Fig. 2
WESTGATE MFG., INC | 2462 E 28th Street, Vernon, CA 90058 USA |1-323-826-9490|[email protected]
