Using
IX
Inserting/Replacing the Batteries
1. Twist the hook at the end of the lamp and align the point mark to
the OPEN position.
2. Remove the lower half of the housing.
3. Insert three new batteries of the type LR6 (AA) into the battery
compartment. Pay attention to the proper polarity of the batteries.
The polarity is printed on the battery compartment.
4. Replace the lower half of the housing. Install it so that the power
switch is located just above the push-button on the battery
compartment. Do not apply force when re-assembling.
5. Twist the hook and align to the LOCK position to close the lamp.
Replace all three batteries when the light of the lamp becomes
weaker.
Remove the batteries from the lamp if you do not use it for a
longer period of time.
Lamp Shield
Power Switch
Hook
LEDs
Battery Compartment