10
Operating
Operating
1. If all connections are firmly tightened, turn on the water tap and connect
the plug to a socket. The max. water temperature should not exceed 60°C.
Never switch on the high-pressure cleaner if water supply is not turned on
in order not to damage the pump.
2. Switch on the high-pressure cleaner with the ON/OFF button (1). The
high-pressure cleaner is on in the position
I
and off in the position
0
.
3. Press the lock-off button (13) outwards in order to lock the trigger (12).
The lock-off button on the gun does not lock the trigger during use. The
lock-off button only prevents the trigger from opening unintentionally.
Press the lock-off button (13) inwards in order to release the trigger.
4. Firmly hold the trigger (12) with one hand and the lance (7) with the other
hand. Press the trigger and direct the lance to the object or surface to be
cleaned.
5. You can select two types of water jet. Turn the
nozzle on the lance (6) clockwise or counter
clockwise to achieve direct power jet or V-spray.
The created working pressure in the high-pressure
cleaner depends on the nozzle setting. The smaller
the nozzle opening is, the higher the dynamic
pressure will be.
6. To finish operation, first switch off the high-
pressure cleaner. Turn off the water tap and pull
the plug to unplug.
7. Press the lock-off button in order to lock the trigger and remove both
hoses from the high-pressure cleaner.
Using the Detergent Bottle
1. Unscrew the lance from the spray gun and connect the spray gun (14) with
the detergent bottle (10).
2. Only use suitable and liquid detergents in order not to damage the object
to be cleaned.
The high-pressure cleaner can be ordered from Westfalia under the article
no. 33 90 28.
