13
Assembling
12. Before attaching the filter bag (13), insert the
tension band (23) into the open seam.
13. After that, slide the bag over the collector (11)
from above and fix it in the upper groove using
the tension band (23).
14. At the lower end of the filter bag, you will find
a loop. Mount the filter bag using this loop to
the filter bag holder (10).
15. Preferably use a plastic bag to catch the
filtered material. Use plastic bags
approximately 78.5 cm width and 100 cm
length.
16. Use the second tension band to fix the bag to
the lower groove of the collector.
17. Attach the double intake flange (5) as shown.
At the intake flange of the ventilator housing
(6), there are three sheet-metal screws. Use
these three screws to mount the intake flange.
18. The intake flange (5) accepts suction hoses
with an inside diameter of 100 mm. If you want
to use only one intake, leave the other one
closed.
The suction hose (1) has an interior diameter
of 100 mm and is extendable to a maximum length of 270 cm.
