Westfalia 96 60 28, Инструкция по эксплуатации

Страница: 18 / 27

13
Using
Inserting the Battery
1. To insert resp. to replace the 3 V Lithium battery
(type CR2032), remove the two screws of the
small battery compartment (10) and pull out the
battery compartment from the other side of the
case.
2. Put the battery into the compartment. Make sure
the +pole (plus pole) faces upwards. Push the
battery compartment back in place and attach it
with the two screws.
Power On/Off
Press and release the Power
button (2) to turn on the digital
torque adaptor. The LCD panel
shows “trACE” or “PtoP” and
then after approx. 2 seconds
“0.0”. A small “wrench” symbol
(A) is displayed at the bottom
right corner of the panel. Each
time you press a button, a
sound will confirm this action.
If you do not use the digital torque adaptor for 80
seconds the system will automatically shut off.
A