Operation
13
+
–
Before first Use
Remove the transport protection foil between the
button cells and the contacts.
1.
Unscrew the top barrel counter clockwise.
2.
Remove the protection foil and re-tighten the ball
pen.
Replacing the Batteries
1.
Replace the batteries with new batteries of the same
type when the light of the LED respectively the UV
light gets weaker or if it does not shine anymore.
2.
Unscrew the top barrel.
3.
Insert three button cells of the type LR41 into the
battery compartment. Pay attention to the proper
polarity of the button cells. The plus pole has to face
towards the tip of the pen.
4.
Screw the barrels together. Always use button cells
of the same type and dimensions.
Operation
1.
Press and hold the push button (1) to
switch on the LED light.
2.
Press and hold the push button (2) to
switch on the UV light. The UV light
is
1
2
