15
Operation
the sender (see next chapter) the LED (B) of the re-
ceiver will light up every 20 seconds, to indicate that
the transmission signal is received. If the receiver
makes quick click sounds and the LED flashed perma-
nently, the batteries are spent. Replace the batteries
immediately.
Sender
– Inserting the Batteries
1. Open the battery compartment and insert
two batteries of the type LR6 (AA) 1.5 V
into the battery compartment, observing
correct polarity. The polarity symbols are
shown in the battery compartment.
2. Close the battery compartment.
All the segments of the display will light
up for approx. 3 seconds and you will
hear a short signal sound. When the display is fade, the
batteries are spent and need to be replaced. Always
use batteries of the same type.
Sender
– Selecting the Temperature Unit
To switch between the temperature unit °C and °F, push
the button “Up“
(9).
Pre-selected Meat Types
PGM = manually programmable Settings
