Westfalia 86 39 50, Инструкция по эксплуатации

Страница: 13 / 18

9
Operation
Before first Use
Remove the screwdriver out of the packaging. Keep packaging
materials out of reach of children. There is risk of suffocation!
Charging the Battery
Plug the charging cable into the charging socket (6) and plug the
charger (8) into a suitable power socket. The red charging level
indicator LED (4) should light up. Before the first use the battery
in the unit must be charged for 3 to 5 hours. Pressing the
charging level indicator button (5) will indicate the charging level.
When the battery is full, all LEDs light up.
Charging Level Indicators
Press the charging level indicator button (5) to indicate the
charging level of the battery at any time. The charging level LEDs
(4) indicate the charging level, the red, yellow and green LED
indicate a full charge, the red and yellow LED a partial charge,
and if only the red LED lights up, you should recharge the
battery.
Inserting the Tools
The unit is equipped with a tool bit socket. Use either the
included tool bit holder or the included ½” adapter to use the
included tool bits or ½” sockets. Please make sure you use the
right bit for each screw. Poor power transfer between screw and
bit will quickly lead to the destruction of the bit and the screw.
Operation and Rotating Direction
The ON/OFF trigger (7) is the rotating direction switch as well.
Press the upper part of the trigger for counter clockwise rotation
and the lower part of the trigger for clockwise rotation.
Cleaning and Maintenance
The unit does not require maintenance and does not contain
parts serviceable by you. Do not use abrasives, water of any
other liquid to clean the unit. Use a moist cloth at the utmost.