23
Troubleshooting
Problem
Possible Cause
Solution
Red and green LEDs
do not illuminate to
indicate the Battery is
correctly charging
Battery not correctly
connected to Charger
Clean Battery Socket
of charger and battery
contacts and fully
slide on to Charger so
it clicks in a locked
Position
Charger not Powered
Recheck Mains
Connection
Battery Pack has low
Capacity
Battery not being fully
charged
Do not remove
Battery until a full
Charge is indicated
Battery pack has
been charged over
100 Times and
Capacity has started
to reduce
This is normal for
Battery packs.
Contact Westfalia
purchase a replace-
ment Battery Pack
Impact Wrench
cannot be switched
on (Trigger Switch (5)
does not move)
The forward/ reverse
Switch may be in the
middle Position
(‘locked’)
Slide the For-
ward/Reverse Switch
either to the left or
right
Impact Wrench does
not start when trigger
switch is depressed
Battery completely
discharged
Recharge Battery or
replace with a fully
charged Battery
Defective Battery
Replace Battery
Tool defective
Contact the Westfalia
customer service