Westfalia 85 33 70, Инструкция по эксплуатации

Страница: 23 / 26

19
Operation
Jig Saw
When using the attachment ALWAYS use the included
retainer (9) to securely connect the neck of the power drill to
the attachment and avoid spinning the attachment. Adjust the
length of the retainer according to your power drill and use it to
connect the neck of your power drill to the attachment as
shown on page IV. Do not use the attachment without the
retainer!
Screw the handle (5) over the nibbler end of the attachment. Tighten
only and tight and do not use tools.
Installing the Saw Blade
Remove the clear cover (4)
from the attachment and
loose the hex screws from
the clamping piece. Re-
move the saw blade from
the clamping slot and insert
the new clamping piece into
the slot.
Retighten the
screws and reattach the
clear cover.
Notes on Using the Saw

Always hold the handle perpendicular to the work piece.

Do not force the saw blade into the work piece. If the results are
not satisfactory, check the saw blade for sharpness.

Guide the saw blade and do not force the tool.

Do not use the impact drill function of your power drill.