Westfalia 828672, Инструкция по сборке

Страница: 8 / 12

8
Mounting
Before staring work on the wheelbarrow, make sure the shipment is complete.
To assemble the wheelbarrow, you require 3 and 4 mm Allen spanners and 8
and 10 mm fork spanners.
All screws are inserted with the screw head on the inside and the nut on the
outside of the wheelbarrow.
It is advisable to tighten all connections only lightly during assembly. After
assembling the wheelbarrow, tighten all screws and nuts.
Assembling the Box of the Wheelbarrow
Mount the box of the wheel-
barrow as shown on the right
picture.
You will need the
following parts for mounting: 1, 7,
8, 9 and the screws and nuts 11,
13 and 15.
Connect the floor panel (7) to the side panels (1) and (9). The folded strips on
the side panels must be below the base plate.
Now install the rear panel. Install the panel in such a way that the folded strips
on the side panels and on the base plate are under the rear panel (e. g.
outside the box). First insert the screws (13) without nuts into the hole.
Attach the brace (6) to the second screw hole on each side for added stability.
Use the screws (11) and the screws (13).