Westfalia 802410, Инструкция по эксплуатации

Страница: 20 / 26

16
Operation
Changing the Sanding Disc
Danger! Use only original sanding discs for this tool.
Always disconnect the air tool from the air supply before servicing.
1. Peel the used disc from the sanding pad (1).
2. Press the new sanding disc on the sanding pad. Observe the position of the
vac holes.
Changing the Sanding Pad
Danger! Always disconnect the air tool from the air supply before servicing.
1. Fold up the rubber shroud.
2. Slide the open end wrench (7) between the rubber shroud and the sanding
pad on the retaining nut.
3. Remove the old sanding pad by turning counter clockwise. Counter with the
open end wrench.
4. Install the new sanding pad by turning clockwise. Counter with the open end
wrench.
Sanding Pad
Shroud
Retaining Nut
tighten loosen
Air Exhaust