IV
Installation
Just place the seat cover on your car seat (office chair or easy chair). Use the straps to fix
it on the seat. There are two straps each for seat and backrest. The upper strap on the
backrest goes behind the headrest to keep the backrest from flipping forward. Close the
lower strap behind the backrest of your seat and use the remaining straps on the seat
cover to fix it to the seat. On the front part of the cover (on the ventilator) is a rubber strap
with a hook. Use it to fix the ventilator to your seat, so it can not sway about and irritate you
while you are driving.
Operation
After fitting the seat cover to the seat, plug the 12V plug into the cigarette
lighter socket (12 V
) of your car. The operability (fuse in the 12V plug
intact) is confirmed by the red LED in the plug.
Now you can adjust the air stream as desired with the turn knob on the
control unit. When the turn knob is turned all the way to the left (ON/OFF),
the ventilator is turned off. To turn the unit on, turn the turn knob right
(direction MAX). The further the turn knob is turned to the right, the faster
the ventilator runs.
If you intend to use the seat cover at home, please use the included
AC/DC - adapter (230 V ~ 50 Hz / 12 V
). Connect the 12V plug of
the seat cover to the 12V socket of the adapter and after that plug the adapter into
a 230 V ~ 50 Hz wall socket. Please use only the included power mains adapter with the
unit.
Changing the Fuse
Use only a fuse of
the same type and
dimensions (F5A
250V (
∅
6.35 x 32
mm)).
Cleaning and Maintenance
Use only a soft brush and a moist cloth to clean the unit. Please allow to dry completely
before use.
Technical Data
Dimensions .......................................Seat 50 cm; Back Rest 60 cm; Width 51 cm
Operating Voltage .............................12 V
Nominal Current................................0.8 A
Length of the power cord ..................approx. 1.60 m to 2.50 m (Spiralised)
Operation
Содержание 61 63 00
Страница 1: ...Westfalia Bedienungsanleitung Nr 106360...
