15
Assembly
Assembly
1. Turn the boiler (4) around and use screws, nuts and washers to
attach the tripod legs (11) to the boiler (4).
2. Assemble the hinge (10) to the boiler (4).
3. Mount the clamp (8) to the door (7).
4. Assemble the holder for the fastening clamp (9) with screws,
nuts and washers to the boiler (4).
5. Use the bolts (6) to mount the door (7) to the hinge (10). Slide
the pin located at the end of the bolt (6) through the hole to fix
the bolt.
6. Attach the handles (5) with screws, nuts and washers at the side
of the boiler (4).
7. Attach the connection pipe (16) to the rear of the boiler (4).
8. Slide the smoke stack (15) onto the connection pipe (16) and
add the roof (14) to the end of the smoke stack (15).
9. Attach the wooden handle (13) to the tray of the ash catcher (12)
using the wood screw.
10. Slide the ash catcher tray (12) into the appropriate opening on
the bottom.
11. Finally place the coal rack (3) and the pot (2) resp. the fry pan
(17) into the boiler (4).
