Document: 1784en02.doc
QWTIME III MASTER CLOCK
Author: PM
Date: 2008-11-07
User Manual
Page: 14 of 61
WESTERSTRAND URFABRIK AB
P.O. Box 133
Tel. +46 506 48000
Internet:: http://www.westerstrand.se
SE-545 23 TÖREBODA
Fax. +46 506 48051
E-mail:
Slave Clock
This function is used to enter the time that the slave clocks are showing.
This is useful if, by some reason, the master clock and the slave clocks should show different times.
When the slave clock time has been entered, the master clock will automatically adjust the slave clocks to
correct time.
Please note that before using this function make sure that all connected slave clocks are showing the same time.
If any of the slave clocks are showing a divergent time this clock must be manually adjusted to the same time as
the other clocks.
The impulses to the slave clocks are temporarily stopped when entering this function.
Select function using
↓
.
Enter the programming mode with
YES
.
SLAVE CLOCK = 09.07? (Example)
If the slave clocks connected to the first output shows 09.07 answer YES,
if not, set the time shown by the slave clocks.
YES.
YES.
SLAVE CLOCK = 09:07:00? (Example)
If the slave clocks connected to the second output shows 09:07:00 answer
YES, if not, set the time shown by the slave clocks.
YES.
YES.
YES.
Leave programming mode by pressing
←
several times.
The master clock is now back in running mode.
MON 13 MAR 2006
09:07:00 LTw
SLAVE CLOCK 1
=
09
:07 OFF
SLAVE CLOCK
SLAVE CLOCK
MON 13 MAR 2006
09:07:00 LTw
SLAVE CLOCK 1
= 09:
07
OFF
SLAVE CLOCK 1
= 09:07
ON?
SLAVE CLOCK 2
=
09
:07:00 OFF
SLAVE CLOCK 2
= 09:
07:
00 OFF
SLAVE CLOCK 2
= 09:07:
00
ON?
SLAVE CLOCK 2
= 09:07:00
ON?
