WESTERSTRAND LUMEX 12, Инструкция по эксплуатации

Страница: 14 / 16

Document: 1862en08.doc
WESTERSTRAND
Author: Tan
Date: 2014-07-08
Page: 14 of 16
WESTERSTRAND URFABRIK AB
P.O. Box 133 Tel. +46 506 48000 Internet:: http://www.westerstrand.se
SE-545 23 TÖREBODA Fax. +46 506 48051 E-mail: info@westerstrand.se
Setting alternating time, Loop time
Push [F] until display shows:
Push [P].
Display shows:
Alternating time for display time is 4 seconds.
Push [P] for desired alternating time (0-25). Accept with [F].
Display shows:
Alternating time for display temp. is 0 seconds.
Push [P] for desired alternating temperature (0-25). Accept with [F].
Display shows:
Alternating time for display date is 4 seconds.
Push [P] for desired alternating time (0-25). Accept with [F].
Push [R] for entering base mode or push [F] for next function.
Setting Correction value for the temperature sensors.
With this function the temperature sensors can be adjusted
±
9 ˚C.
Push [F] until display shows:
Push [P]:
Display shows:
Push [P] for desired correction value (
±
9 ˚C). Accept with [F].
Push [R] for entering base mode or push [F] for next function.
LooP
L1 4
L2 0
L3 4
Corr
C1 0