manualshive.com logo in svg

Western POLY PRO-PLOW Series 2, Руководство по установке, Страница: 13 / 16

Поделиться
Скачать
Western POLY PRO-PLOW Series 2 Скачать руководство пользователя страница 13

Lit. No. 49583, Rev. 02 

13 

June 1, 2016

BLADE DROP SPEED ADJUSTMENT

The quill in the top of the valve manifold on the 

passenger-side front corner of the hydraulic unit 

adjusts the blade drop speed.

1.  Move the driver-side lift chain from the lift arm 

hook to the cable boot bracket on the side of the 

upper lift frame.

2.  Remove and retain the two hairpin cotters, 

washers and pins attaching the lift arm to the lift 

frame.

OPERATIONAL TESTS AND FINAL ADJUSTMENTS

 WARNING

Keep 8' clear of the blade when it is being 

raised, lowered or angled. Do not stand 

between the vehicle and blade or directly in 

front of the blade. If the blade hits or drops on 

you, you could be seriously injured.

3.  Pivot the lift arm and lift ram forward and remove 

the hydraulic unit cover.

4.  Replace the two clevis pins, washers and hairpin 

cotters to reattach the lift arm to the lift frame.

5. 

Turn the quill IN (clockwise) to decrease drop 

speed. 

 

Turn the quill OUT (counterclockwise) to increase 

drop speed.

6.  Stand 8' clear of the blade when checking the 

adjustment.

7.  Remove and retain the two hairpin cotters, 

washers and pins attaching the lift arm to the lift 

frame.

8.  Replace the hydraulic unit cover. Pivot the lift arm 

and lift ram up.

9.  Replace the two clevis pins, washers and hairpin 

cotters to reattach the lift arm to the lift frame.

10.  Move the driver-side lift chain back to the lift arm 

hook.

Quill

Move chain

to here

Содержание POLY PRO-PLOW Series 2

















Отзывы:

Нет отзывов