background image

Lit. No. 43755, Rev. 00 

May 15, 2015

INTRODUCTION

This manual has been prepared to acquaint you with 
the safety information, operation and maintenance of 
your new tailgate spreader. Please read this manual 
carefully and follow all recommendations. This will 
help ensure pro

fi

 table and trouble-free operation of 

your spreader. Keep this manual accessible. It is a 
handy reference in case minor service is required.

When service is necessary, bring your spreader to 
your distributor. They know your spreader best and are 
interested in your complete satisfaction.

NOTE: This spreader is designed to spread snow 
and ice control materials only. Do not use it 
for purposes other than those speci

fi

 ed in this 

manual.

Register your spreader online at 

www.westernplows.com

OWNER'S INFORMATION

Owner's Name: ______________________________________________________________________

Date Purchased: _____________________________________________________________________

Distributor Name:  __________________________________________  

Phone: _________________

Distributor Address: ___________________________________________________________________

Vehicle Model: _____________________________________________ 

Year: __________________

Spreader Model: _________________________ 

Serial #: __________________________________

Spreader Weight: _____________________lb/kg

www.storksplows.com

Содержание 91600

























Отзывы: