Stalker 360 – User’s Manual
V1.0
2
button function is the same on both the game caller and the remote. If the “Next 10” button appears not to work on
either unit, check the battery for status. If you use the button pad on the game caller to operate the functions of the
caller, the LCD on the remote control
will not
show the same information.
Requests transmitted from the remote
control
will be
shown on the game caller’s LCD.
PREVIOUS 10 BUTTON:
The “Previous 10” button recalls ten (10) sounds at once, thus allowing you
to instantly scan through your entire library of sounds in the order they were loaded very quickly. The
button function is the same on both the game caller and the remote. If the “Previous 10” button appears
not to work on either unit, check the battery for status. If you use the button pad on the game caller to operate the
functions of the caller, the LCD on the remote control
will not
show the same information.
Requests transmitted
from the remote control
will be
shown on the game caller’s LCD.
VOLUME UP BUTTON:
The “Volume Up” button adjusts the volume upward from the current
setting on the game caller to the desired level. Press to increase volume step by step OR press & hold to
increase quickly. Remote button provides the same function. The LCD bar volume bar will display the
current level of sound on the game caller and the remote. If you use the button pad on the game caller to operate
the functions of the caller, the LCD on the remote control
will not
show the same information.
Requests
transmitted from the remote control
will be
shown on the game caller’s LCD.
VOLUME DOWN BUTTON:
The “Volume Down” button adjusts the volume downward from the
current setting on the game caller to the desired level. Press to decrease volume step by step OR press
& hold to decrease quickly. Remote button provides the same function. The LCD bar volume bar will
display the current level of sound on the game caller and the remote. If you use the button pad on the game caller to
operate the functions of the caller, the LCD on the remote control
will not
show the same information.
Requests
transmitted from the remote control
will be
shown on the game caller’s LCD.
DECOY BUTTON:
The “Decoy” button allows the user to power on/off any motion device plugged in
to simulate a live animal. (#174 Deceptor Rabbit) You must have the 2.5mm / 2.5mm power cord
adapter for this function to work properly. Simply hook the power cord adapter to the units decoy
auxiliary port & then to the Deceptor Rabbit.
IMPORTANT NOTE:
DO NOT install any batteries into the decoy if using power from the game caller.
Once this is done you now have control of the motion for the decoy with the “Decoy” button on the unit or the
remote. Press firmly once to activate & press again to deactivate. If you use the button pad on the game caller to
operate the functions of the caller, the LCD on the remote control
will not
show the same information.
Requests
transmitted from the remote control
will be
shown on the game caller’s LCD. Decoy available at
www.gsmoutdoors.com.
SINGLE/DUAL SPEAKER:
The game caller features Dual Hi-output swivel speakers for increased
volume and high performance sound clarity. This button will allow you to select if you’d like to play
the sound from the one right side speaker or both speakers instantly. The icon on the LCD will denote
how many speakers are in use.
Simply press the button once to select the opposite. Use of both speakers at
the
same
time will greatly reduce operating time. If you use the button pad on the game
caller
to
operate the functions of the caller, the LCD on the remote control
will not
show the
same information.
Requests transmitted from the
remote control
will be
shown on the game caller’s LCD.
SPEAKER SELECTION:
The game caller also allows you the ability to select which speaker you
would like to rotate. By pressing the icon you will switch from left to right to both speakers. The icon on
the LCD will denote which speaker(s) you chose.
(Speaker Selection -L/R)
(Rotating Icon)
Remote button provides the same function. If you use the button pad on the game caller to operate the functions of
the caller, the LCD on the remote control
will not
show the same information.
Requests transmitted from the
remote control
will be
shown on the game caller’s LCD.
