Western Digital WD1004-27X, Руководство по установке

Страница: 2 / 9

IDENTIFY DRIVE
The WD1004-27X and WD1004A-27X boards work with any hard disk drive that
has the ST506/412 drive interface and no more than 1024 cylinders and 16 heads.
The Seagate 238 hard disk drive unit is such a drive.
Look in your drive manual to verify that you have an ST506/412 RLL drive or
check with your dealer.
Then check the drive manual for the drive parameters, such as those listed in Table
1-1. You'll need this information to select the proper low level format.
Table 1-1. WD1004 and WD1004A Default Drive Parameters
Formatted
Capacity
Number of
Heads Number of
Cylinders Sectors per
Track
32MB 4 615 26
This board does not work with RLL drives. If you have an MFM drive you
need either the WDXT–GEN2 or WD1004A–WX1 board.
1-2