manualshive.com logo in svg

Western Digital Purple PR1334M, Техническое справочное руководство

Поделиться
Скачать
Western Digital Purple PR1334M Скачать руководство пользователя страница 51

WD Purple PR1334M 

Installation and Setup Procedures

2679-800084-A04

RELEASED 5/3/17 (WD CONFIDENTIAL)

39

5.0

I

NSTALLATION AND 

S

ETUP 

P

ROCEDURES

Hard drives are precision instruments that must be handled with care to prevent damage. It is 
important to understand that drives are typically damaged because of Electrostatic Dis-
charge (ESD), rough handling, or shock and vibration. Refer to the 

WD 3.5-inch Hard Drive Han-

dling poster (part number 2378-701046)

 for details on drive handling. 

Refer to 

http://

support.wd.com/warranty

 for detailed instructions on all phases of repackaging the 

drive.

5.1

Unpacking

5.1.1

Handling Precautions

WD products are designed to withstand normal handling during unpacking and 
installation. Take care to avoid excessive mechanical shock or electrostatic discharge 
(ESD), which can permanently damage the hard drive and void the warranty. Hard 
drives are typically damaged because of ESD, rough handling, or shock and vibration.

To avoid ESD problems, wear a properly grounded wrist strap when handling the 
hard drive. Articles of clothing generate static electricity. Do not allow clothing to 
come in direct contact with the hard drive or circuit board components.

When the WD drive is not in its shipping container or installed in its proper host 
enclosure, it must remain in the anti-static bag. To prevent damage, do not unpack 
your WD drive until you are ready to install it.

5.1.2

Inspection of Shipping Container

Carefully examine the container for obvious shipping damage, such as: holes, signs of 
crushing, or stains. Notify the carrier and your WD representative if you observe any 
shipment damage. Always move the shipping container in the upright position 
indicated by the arrows on the container.

5.1.3

Removal From Shipping Container

Remove the WD drive from the shipping container only for inspection or installation. 
Carefully open the box. When removing the WD drive from the box, follow these 
precautions:

n

Grasp the drive by the sides only; avoid touching the circuit board components.

n

Gently place the drive on its anti-static bag on a clean, level, grounded work area. 

n

Do not stack drives or stand the WD drive on its edge.

Important:

If your system does not support hot plugging (see “Hot Plug Support” on page 21), it

must be turned off and unplugged before installing your hard drive.

CAUTION:

When removing the drive from the shipping container, be careful not to drop it.

Dropping the drive can severely damage the head disk assembly or printed circuit board.

Содержание Purple PR1334M
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды