Western Digital PATA Hard Drive Скачать руководство пользователя страница 6

-4-

Alternate Instructions for Installing a Drive 

Windows 7/Vista

Windows 7 and Vista operating systems have all the necessary 
tools to help you properly install a PATA drive. Depending on your 
configuration, follow the appropriate set of instructions below 
(Single Install or Adding a Second Drive).

Note:

 Ensure your drive is detected by your PATA controller during 

bootup or in the system BIOS by disconnecting any other hard 
drives from the computer system until Windows has been 
completely installed on the desired hard drive.

Single Install:

If your PATA controller supports RAID, you may need to define your 
drive in a RAID Array before Windows can detect the drive, even if 
the motherboard or system drivers are being loaded correctly. This 
is true even if installing a single drive. Contact your system or RAID 
controller manufacturer for assistance on defining your drive in a 
RAID Array.
1. Insert the Windows Vista DVD into the DVD-ROM drive and 

restart the system.

2. Follow the onscreen prompts until the 

Where do you want to 

install Windows?

 screen displays. 

3. Your hard drive is listed in the center window screen as “Disk 0 

Unallocated Space.” 
–If you want a single partition (single drive letter), click 

Next

 to 

automatically partition and format your hard drive in NTFS. 
Windows Vista continues installing.

–If you want multiple partitions on this hard drive, click 

Drive 

options (advanced)

 and skip to step 5 below.

–If your hard drive is not detected, you may need to obtain third 

party PATA controller drivers from the PATA controller 
manufacturer. These drivers must be installed from a CD, DVD, 
floppy, or USB flash drive.

4. After clicking

 Drive options (advanced)

, click 

New

 to add a 

new partition to the hard drive.

5. Enter the capacity of the partition and click 

Apply

.

6. Select the Disk 0 Unallocated Space and click 

New

 to add 

another new partition to the hard drive.

7. Enter the capacity of the partition and click 

Apply

.

8. Repeat steps 6 and 7 until the desired amount of partitions is 

obtained, then click 

Next

 to continue installing Windows Vista on 

the first partition.

Adding a Second Drive:

1. Start Windows Vista and allow the operating system to boot to 

the desktop.

Note: 

Be sure you are logged in as System Administrator.

2. Once Windows has fully booted up, left-click the 

Start

 button to 

access Disk Management.

3. Right-click 

Computer

.

4. Left-click 

Manage

.

5. When Computer Management opens, click Disk Management.

Partitioning/Formatting:

Note:

 In two separate windows, on the right side of the screen, a 

graphical representation of the partitions on the installed hard drives 
is displayed. The top window is for viewing a drive’s status, 
capacity, and file system. The bottom window displays a 
representation of the drives in the system beginning with the boot 
drive (drive 0). In almost all cases, you will want to work with the 
bottom window.
1. Locate the newly installed hard drive and right-click the long 

Unallocated

 banner device listing.

2. Click 

New Simple Volume

 from the menu.

3. The New Simple Volume Wizard appears. Click 

Next

 to continue.

4. Select the capacity of the first partition you want on this hard 

drive. If you want a single partition (single drive letter), leave the 
capacity the default value and click 

Next

.

5. You may assign a drive letter that is not already in use by other 

devices, then click 

Next

 to continue.

6. Leave the allocation unit size at default and label the drive as 

desired. Select 

Perform a quick format

 and then click 

Next

 to 

continue.

7. Click 

Finish

 when done.

5

Important: 

You may need to initialize the drive or write a 

signature to it. Go to support.wdc.com and see Answer ID 3336: 
“How to initialize or write a signature to a hard drive in Windows 
Vista” for help initializing the drive.

Содержание PATA Hard Drive









Отзывы: